TOHATSU MFS 25D Service Manual page 247

3. Use a commercially available bearing puller to remove the
ball bearing.
Before removal, check the bearing for play or
deflection. Replace if necessary.
Remove the oil seal 1.
4.
Do not scratch the housing when removing the oil
seal.
Remove the roller bearing 2.
5.
Do not reuse a removed bearing.
Needle Bearing Attachment 3:
P/N. 3AC-99710-0
Driver Rod 4:
P/N. 3AC-99702-0
4st 25/30 2022
CAUTION
Do not reuse.
1
1 Oil Seal Do not reuse.
2 Roller Bearing
Do not reuse.
6
6-17