Removal Of Drive Shaft Housing - TOHATSU MFS 25D Service Manual

Bracket

4) Removal of Drive Shaft Housing

1. Prepare a waste oil receptacle under the drain hole,
remove the drain bolt, and drain the oil completely. Refer
to Chapter 3.
Remove the bolt 1 and remove the bolt cover 2.
2.
Remove the lower mount nut 3 and bolt 4.
3.
Remove the upper rubber mount nuts 5.
4.
Remove the drive shaft housing 6 and the damper from
5.
the clamp bracket assy.
Be careful not to drop the drive shaft housing
during removal from the clamp bracket.
7-30 4st 25/30 2022