Table of Contents
Advertisement
9. To connect quick couplers, connect the hydraulic hoses to a
windrower with quick coupler fittings as follows:
a.
Connect disc pressure hose (A) to coupler (B). Torque
the connection to 216 Nm (159 lbf·ft).
b. Connect disc return hose (C) to coupler (D). Torque the
connection to 216 Nm (159 lbf·ft).
c.
Connect case drain hose (E) to fitting (F), with the relief
valve pointing towards the ground.
NOTE:
If necessary, loosen fitting (F) and retighten it to ensure
that the relief valve is pointing straight down.
10. Free electrical harness (A) from adjustable strap (B).
262175
ATTACHING HEADERS TO WINDROWER
172
E
A
B
Figure 5.164: Quick Couplers
Figure 5.165: Electrical Harness Secured to Center-Link
C
F
D
B
A
Revision A
Advertisement
Table of Contents
