7. Secure forming shield (C) to bolt and spacer (D) using clevis
pin (B) and lynch pin (A).
8. Repeat Step
5, page 159
opposite side of the forming shield.
9. Remove lynch pin (A) and washer (B) from straight pin (C).
262175
ATTACHING HEADERS TO WINDROWER
to Step
7, page 160
on the
Figure 5.142: Forming Shield Secured to Front of
Windrower Legs
Figure 5.143: Lynch Pin and Washer at Rear of
Windrower Leg
160
A
B
C
D
A
C
B
Revision A