17. Ensure that the hydraulic hose routing is as straight as
possible.
IMPORTANT:
Straight routing will prevent abrasion damage to the
hydraulic hoses.
18. Push latch (A) to unlock platform (B).
19. Pull platform (A) toward the cab until it stops and the latch
is engaged.
20. If this is the first time the header is connected to the
windrower, calibrate the header. For instructions, refer to
5.6 Calibrating Header on HarvestTouch
262175
ATTACHING HEADERS TO WINDROWER
™
Display, page
227.
131
Figure 5.73: Hydraulic Multicouplers and Hose
Routing
B
Figure 5.74: Left Platform
Figure 5.75: Left Platform
A
1015478
A
Revision A