Table of Contents
Advertisement
8. Select PLAY icon (A).
NOTE:
The PLAY icon will only appear if the header is engaged.
9. The calibration will attempt the first calibration stage.
NOTE:
Selecting X icon (A), HOME, or BACK, or pressing any of the
ground speed lever (GSL) buttons at any time during the
calibration process will EXIT the calibration procedure
without saving your progress. The engine speed will also
return to the original rpm prior to starting the calibration
process.
NOTE:
If a sensor goes out of its normal operating range during
the calibration process, calibration will stop and a message
will appear on the screen indicating that a sensor is out
of range.
10. When the first stage of the calibration is complete, select
PLAY icon (A) on the screen to continue with the second
stage of the calibration process.
262175
ATTACHING HEADERS TO WINDROWER
233
Figure 5.302: Engage Header Warning
Figure 5.303: Calibration Page
Figure 5.304: Calibration Page
A
A
A
Revision A
Advertisement
Table of Contents
