4. Remove and discard shipping shoe (A) and its mounting
hardware (B) from both wheel legs (C).
5. Clean the mounting surface on the wheel drive and the rim.
6. Position lifting device (A) under the wheel as shown. Raise
the wheel slightly.
7. Position the wheel against the wheel drive hub so that air
valve (B) is on the outside and tread (C) points cab-forward.
NOTE:
For wheels equipped with turf tires (those with a diamond
tread pattern), ensure that the arrow on the sidewall points
cab-forward.
262175
ASSEMBLING WINDROWER
C C
Figure 3.16: Wheel Leg Shipping Shoe
Figure 3.17: Drive Wheel Ready for Installation
27
B
A
C
B
A
Revision A