MacDon M2170 Unloading And Assembly Instructions page 40

ASSEMBLING WINDROWER
F A
D C
E B
C B
A A
Figure 3.26: Right Leg Pins Installed
11. Secure the pins with M20 x 500 leg pin bolts (A), washers (B), and M20 nuts (C).
12. Tighten nuts (C) to 136 Nm (100 lbf·ft).
13. Lower the pallet jack. Remove the pallet jack from the work area.
14. Support the windrower with a forklift, and remove the stand. Lower the windrower to the ground.
32
262175 Revision A