Table of Contents
Advertisement
20. Pull platform (A) toward the cab until it stops and the latch
is engaged.
21. Remove hose support (A) from the windrower's left leg.
22. Place hydraulics/electrical bundle (A) in the storage position
on the header.
23. Back the windrower away from the header.
24. Shut down the engine, and remove the key from
the ignition.
262175
ATTACHING HEADERS TO WINDROWER
115
Figure 5.42: Left Platform
B
Figure 5.43: Multicoupler
A
Figure 5.44: Hydraulics Hoses in Storage Position
A
A
A
Revision A
Advertisement
Table of Contents
