Checking Engine Gearbox Lubricant Level And Adding Lubricant - M2260 Windrowers - MacDon M2170 Unloading And Assembly Instructions

Windrower
Hide thumbs Also See for M2170:
Table of Contents

Advertisement

4. If lubricant is needed, remove breather cap (A) and add
lubricant until it runs out of the level check port.
NOTE:
For oil requirements, refer to the inside back cover.
5. Replace oil level check plug (A) and the breather cap, and
tighten both.
4.1.8 Checking Engine Gearbox Lubricant Level and Adding Lubricant – M2260
Windrowers
Ensure that the gearbox lubricant level is correct in order to maximize the service life of its components.
1. Open the hood. For instructions, refer to the windrower operator's manual.
262175
PERFORMING PREDELIVERY CHECKS
Figure 4.15: Gearbox Lubricant Filler
Figure 4.16: Gearbox Lubricant Check Plug
56
A
A
Revision A

Advertisement

Table of Contents
loading

This manual is also suitable for:

M2260

Table of Contents