Table of Contents
Advertisement
3.5 Repositioning Right Leg
The right cab-forward leg must be changed from the shipping configuration to the field configuration.
DANGER
Ensure that all bystanders have cleared the area.
IMPORTANT:
Do NOT open the right cab-forward door while the right leg is in the shipping configuration. If the door contacts the leg,
the door glass may shatter, or the door seals may be damaged.
1. Clear all bystanders from the area.
2. Using a forklift, lift the front of the windrower. Use
stand (A) (or an equivalent) to support the front of the
windrower so that right drive wheel (B) remains off of the
ground.
3. Slowly lower the windrower onto stand (A).
4. Place pallet jack (C) (or an equivalent) under right drive
wheel (B). Raise the pallet jack so that the right drive wheel
is supported and the right cab-forward leg does not bear
any of the wheel's weight.
5. Remove shipping tag and wire (A) from the traction drive
hoses under the cab.
262175
ASSEMBLING WINDROWER
C
Figure 3.20: Windrower Right Leg Supported
Figure 3.21: Shipping Tag Under Windrower Cab
29
B
A
A
Revision A
Advertisement
Table of Contents
