Chapter 3: Assembling Windrower
Once the windrower has been unloaded, assembly can begin.
3.1 Lowering Steps
Lowering the steps allows safe and easy access to the cab.
1. Locate the left cab-forward steps. Remove and discard stop
bolt and nut (A).
2. Loosen pivot bolts (B) securing steps (C).
3. Lower left steps (A) to the working position.
4. Ensure that clips (B) are engaged in the steps.
5. Tighten pivot bolts (C) to 95 Nm (70 lbf·ft).
262175
Figure 3.1: Left Step – Shipping Position
B
B
B
A
A
A
Figure 3.2: Left Step – Working Position
17
C
A
B
C
C
C
Revision A