Table of Contents
Advertisement
3.8 Positioning Mirror Arms
The mirror arms must be moved to the field position.
C
Figure 3.42: Mirror Arm Swiveled into Field Position
1. Loosen retaining nut (A) and pivot nut (B) on support arm (C). Swivel the support arm cab-forward by 90°.
IMPORTANT:
Do NOT allow any wiring harness to get caught in the swivel mechanism (D).
2. Torque retaining nut (E) to 48 Nm (35 lbf·ft).
3. Torque pivot nut (B) to 26 Nm (230 lbf·in).
4. Repeat this procedure for the other mirror arm.
262175
ASSEMBLING WINDROWER
A
B
E
D
39
Revision A
Advertisement
Table of Contents
