Table of Contents
Advertisement
Predelivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. Complete this checklist and provide it to the
Dealer or the Operator.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to hazards and
unsafe practices.
Windrower Serial Number:
M2170 and M2260 Windrower Predelivery Checklist
ü ü Item
Check for shipping damage or missing parts. Ensure that all
shipping material has been removed.
Check for loose hardware. Tighten any loose hardware to the
specified torque value.
Check the pressure level of the drive and caster tires. Ensure
that the pressures matches the specified values.
Check the lubricant level in the wheel drive hubs.
Check the level of the engine coolant.
Check the engine air intake.
Check the level of engine oil. Ensure that there are no engine
oil leaks.
Check the level of hydraulic oil. Ensure that there are no
hydraulic fluid leaks.
Check the fuel separator for water and foreign material.
Drain and clean the fuel separator as needed.
Check level of lubricant in the gearbox.
Ensure that the air conditioning compressor belt is properly
tensioned.
Ensure that the operator presence system is working
properly.
Ensure that the horn is working properly.
Start the engine. Allow the engine to reach operating
temperature. Perform the Operational Checks listed below.
Ensure that the fuel and diesel exhaust fluid (DEF) gauges on
™
the HarvestTouch
Display work properly.
Ensure that the engine speed is displayed correctly on
™
the HarvestTouch
Display.
Ensure that selective catalytic reduction (SCR) conditioning
inhibit is turned off.
262175
Engine Serial Number:
Reference
6.4 Torque Specifications, page 243
4.1.13 Checking Tire Pressure, page 64
4.1.11 Checking and Adding Wheel Drive Lubricant –
10 Bolt Wheels, page 63
Adding Wheel Drive Lubricant – 12 Bolt (Optional),
page 63
4.1.6 Checking And Adding Engine Coolant, page 54
4.1.2 Checking Engine Air Intake, page 50
4.1.3 Checking and Adding Engine Oil, page 51
4.1.4 Checking and Adding Hydraulic Oil, page 52
4.1.5 Checking Fuel Separator, page 54
4.1.7 Checking Engine Gearbox Lubricant Level and
Adding Lubricant – M2170 Windrowers, page 55
4.1.8 Checking Engine Gearbox Lubricant Level and
Adding Lubricant – M2260 Windrowers, page 56
4.1.9 Checking Air Conditioning Compressor Belts,
page 57
4.2.1 Checking Operating Safety System, page 70
4.2.11 Checking Horn, page 88
4.1.10 Starting Engine, page 58
4.2.3 Checking HarvestTouch
73
4.2.8 Checking Engine Speed, page 81
4.2.9 Checking Selective Catalytic Regeneration
Conditioning Mode, page 82
255
—
or
4.1.12 Checking and
or
™
Display Gauges, page
Revision A
Advertisement
Table of Contents
