Table of Contents
Advertisement
• Air conditioning (A/C) box connectors (A)
Two connectors: C15 and C16
Location: Rear of the A/C box
NOTE:
To disconnect circular Deutsch connectors, rotate the outer
collar counterclockwise.
IMPORTANT:
To connect circular Deutsch connectors without bending the
pins, fully align the plug with the receptacle before pressing
the connector in.
• Wheel motor connectors (A)
Two round connectors: C25 and C26
Location: Under the center of the frame, just behind the
front cross member
NOTE:
To disconnect circular Deutsch connectors, rotate the outer
collar counterclockwise.
IMPORTANT:
To connect circular Deutsch connectors without bending the
pins, fully align the plug with the receptacle before pressing
the connector in.
To align round connectors:
1. Observe the channel cuts and mating channel protrusions on the inner part of the circular walls of the connectors.
2. Face the mating connectors towards each other, and rotate the connectors so that the channels are aligned.
3. Press the connectors together while turning the outer connector clockwise until the collar locks.
262175
SAFETY
Figure 1.24: A/C Box Connectors
Figure 1.25: Wheel Motor Connectors
11
A
A
Revision A
Advertisement
Table of Contents
