5. D115X Draper Headers: Pull hydraulic hose management
system (A) towards the left outboard end of the header,
disengage ball stud (B) from the cradle in support (C).
6. Push the link on latch (C) and pull handle (A) on hydraulic
hose management system (B) rearward to disengage the
arm from the latch.
7. Move hydraulic hose management system (B) toward the
left cab-forward side of the windrower.
8. Connect hydraulic hose management system (A) to the left
outer leg of the windrower by pushing ball stud (B) into ball
stud latch (C).
NOTE:
The hydraulic hoses have been removed from the
illustration for clarity.
262175
ATTACHING HEADERS TO WINDROWER
149
A
Figure 5.114: Hydraulic Hose Management
System – D115X
C
Figure 5.115: Hydraulic Hose Management System
A
Figure 5.116: Windrower Left Outer Leg
B
C
B
A
B
C
Revision A