Table of Contents
Advertisement
For rotary disc-only hard-plumbed configuration (A), refer to
Rotary Disc-Only Configuration – Hard-Plumbed Connections,
page 180
for instructions.
For rotary disc-ready configuration with quick couplers (A),
Rotary Disc-Only Configuration – Quick Coupler
refer to
Connections, page 184
for instructions.
Auger/Rotary Disc/Draper-Ready Configuration – Quick Coupler Connections
Windrowers with the auger/rotary disc/draper-ready configuration are equipped with the hydraulic connections needed to
pair with an auger, rotary disc, or draper header.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
CAUTION
Do NOT stand on an unlocked platform. It is unstable and may cause you to fall.
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all (fixed and
movable) hydraulic couplers.
1. Shut down the engine, and remove the key from the ignition.
262175
ATTACHING HEADERS TO WINDROWER
175
Figure 5.171: Header Hydraulics Configuration –
Rotary Disc-Ready with Hard-Plumbed Connections
Figure 5.172: Header Hydraulics Configuration –
Rotary Disc-Ready with Quick Couplers
A A
A A
Revision A
Advertisement
Table of Contents
