7. Remove lynch pin (A) and clevis pin (B) securing forming
shield (C) to bolt and spacer (D). Repeat this step at the
opposite side of the forming shield.
8. Dismount forming shield (A) from bolts and spacers (B).
9. Reattach the clevis pin and the lynch pin to the forming
shield.
10. Remove the forming shield.
262175
ATTACHING HEADERS TO WINDROWER
198
Figure 5.225: Forming Shield Secured to Front of
Windrower Legs
B
A
Figure 5.226: Forming Shield under Windrower Frame
A
B
C
D
B
Revision A