Omron OMNUC FND Series User Manual page 7

Caution Provide an appropriate stopping device on the machine side to secure safety. (A
!
holding brake is not a stopping device for securing safety.) Not doing so may result in
injury.
Caution Provide an external emergency stopping device that allows an instantaneous stop of
!
operation and power interruption. Not doing so may result in injury.
Caution Take appropriate and sufficient countermeasures when installing systems in the fol-
!
lowing locations. Not doing so may result in equipment damage.
Locations subject to static electricity or other forms of noise.
Locations subject to strong electromagnetic fields and magnetic fields.
Locations subject to possible exposure to radioactivity.
Locations close to power supplies.
Operation and Adjustment Precautions
Caution Confirm that no adverse effect will occur in the system before performing the test
!
operation. Not doing so may result in equipment damage.
Caution Check the newly set parameters for proper execution before actually running them.
!
Not doing so may result in equipment damage.
Caution Do not make any extreme adjustments or setting changes. Doing so may result in
!
unstable operation and injury.
Caution Separate the Servomotor from the machine, check for proper operation, and then
!
connect to the machine. Not doing so may cause injury.
Caution When an alarm occurs, remove the cause, reset the alarm after confirming safety,
!
and then resume operation. Not doing so may result in injury.
Caution Do not come close to the machine immediately after resetting momentary power in-
!
terruption to avoid an unexpected restart. (Take appropriate measures to secure
safety against an unexpected restart.) Doing so may result in injury.
Caution Do not use the built-in brake of the Servomotor for ordinary braking. Doing so may
!
result in malfunction.
Maintenance and Inspection Precautions
WARNING
Do not attempt to take the Unit apart or repair. Doing either of these may result in
!
electrical shock or injury.
Caution Resume operation only after transferring to the new Unit the contents of the data re-
!
quired for operation. Not doing so may result in equipment damage.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com