Omron OMNUC FND Series User Manual page 316

Appendices
No. Name Min. unit
UP-
25 Monitor ---
output
26 Motor ---
rotation
direction
28 Brake ON 0.1%
speed
29 Motor test 1 r/min
speed
0.1 Ω
30 External
regeneration
resistance
value
31 External 0.01 kW
regeneration
resistance
capacity
7-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Factory
range setting
000 to 010 Specifies monitor output func-
011 tion.
0
0, 1 0 Specifies motor rotation direc-
tion.
0: Forward rotation
1: Reverse direction
0.0 to 1.0 Specifies r/min to turn OFF
100.0 break output in on-hold brake
mode.
Specifies rate based on rated
motor r/min as 100%.
* The brake may be damaged
if the on-hold brake mode is
selected for motors rotating
at high speed.
1 to 50 Specifies r/min for motors for
8,000 testing.
* When testing a motor, make
sure that the set value is
less than the rated motor r/
min.
0.0 to 0.0 Specifies the regeneration
100.0 absorption value (Ω).
* Only valid for FND-X50H- .
* When using an OMRON-
made external Regeneration
Resistor, set to 30.0 (Ω).
0.00 to 0.00 Specifies the regeneration
327.67 absorption capacity (kW).
Only valid for FND-X50H- .
Explanation
Positive voltage
0: Not reversed
1: Reversed
Speed/Current selection
0: Current
1: Speed
Chapter 7
Re-power Set
required? value
No
No
No
No
Yes
Yes