Omron OMNUC FND Series User Manual page 63

Design and Installation
Using OMNUC U-series AC Servomotors: 30 to 750 W Conforming to
UL/cUL or UE Type Not Conforming to Any Standards
SYSMAC CV/C-series
Programmable Controller
Encoder Cable
R88A-CRU C
(for incremental encoder)
R88A-CSU C
(for absolute encoder)
Note Refer to Chapter 5 Specifications for connector and cable specifications.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
C200HX/HG/HE or CQM1
Programmable Controller
General-purpose
Control Cable
FND-CCX S
FND-X-series Position Driver
(DIO Type)
Power Cable
R88A-CAU
R88A-CAU
SRM1-C01/-C02
Master Control Unit
CompoBus/S Communications Cable
(SCA1-4F10 Flat Cable or commer-
cially available VCTF cable)
FND-X-series Position Driver
(CompoBus/S Type)
Backup Battery
S
B
Connect when using a
Servomotor with an abso-
lute encoder.
OMNUC U-Series AC Servomotor
Conforming to UL/cUL or
U-UE-Series AC Servomotor Not
Conforming to Any Standards
Chapter 2
2-39