Omron OMNUC FND Series User Manual page 3

Thank you for choosing this OMNUC FND-X-series product.
This manual provides details on the installation, wiring, troubleshooting, and maintenance of
OMNUC FND-X-series products along with parameter settings for the operation of the products.
Make sure that actual users of this product will read this manual thoroughly and handle and operate the prod-
uct with care.
Retain this manual for future reference.
This manual describes the specifications and functions of the product and relations with other products. As-
sume that nothing described in this manual is possible.
Specifications and functions may change without notice to improve product performance.
Forward and reverse rotation of AC Servomotors described in this manual are defined as looking at the end of
the output shaft of the motor as follows: counterclockwise rotation is forward and clockwise rotation is reverse.
1. Refer to Precautions first and carefully read and be sure to understand the information provided.
2. Familiarize yourself with this manual and understand the functions and performance of the Servo-
motor and Servo Driver for proper use.
3. The Servomotor and Servo Driver must be wired and operated by experts in electrical engineering.
4. We recommend that you add the following precautions to any instruction manuals you prepare for
the system into which the product is being installed.
Precautions on the dangers of high-voltage equipment.
Precautions on touching the terminals of the product even after power has been turned OFF.
(These terminals are live even with the power turned OFF.)
5. Do not perform withstand voltage or other megameter tests on the product. Doing so may damage
internal components.
6. Servomotors and Servo Drivers have a finite service life. Be sure to keep replacement products on
hand and to consider the operating environment and other conditions affecting the service life.
7. Do not set any parameter not described in this manual, otherwise the Servomotor or Servo Driver
may malfunction. Contact your OMRON representatives if you have any inquiry.
Before using the product under the following conditions, consult your OMRON representatives, make
sure that the ratings and performance characteristics of the product are good enough for the systems,
machines, or equipment, and be sure to provide the systems, machines, or equipment with double safety
mechanisms.
1. Conditions not described in the manual.
2. The application of the product to nuclear control systems, railroad systems, aviation systems, ve-
hicles, combustion systems, medical equipment, amusement machines, or safety equipment.
3. The application of the product to systems, machines, or equipment that may have a serious influence
on human life and property if they are used improperly.
Items to Check After Unpacking
Check the following items after removing the product from the package:
Has the correct product been delivered (i.e., the correct model number and specifications)?
Has the product been damaged in shipping?
The product is provided with Safety Precautions Sheets. No connectors or mounting screws are
provided.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
General Instructions
NOTICE