Omron OMNUC FND Series User Manual page 6

Storage and Transportation Precautions
Caution Do not hold by the cables or motor shaft while transporting the product. Doing so
!
may result in injury or malfunction.
Caution Do not place any load exceeding the figure indicated on the product. Doing so may
!
result in injury or malfunction.
Caution Use the motor eye-bolts only for transporting the Servomotor. Using them for trans-
!
porting the machinery may result in injury or malfunction.
Installation and Wiring Precautions
Caution Do not step on or place a heavy object on the product. Doing so may result in injury.
!
Caution Do not cover the inlet or outlet ports and prevent any foreign objects from entering
!
the product. Doing so may result in fire.
Caution Be sure to install the product in the correct direction. Not doing so may result in mal-
!
function.
Caution Provide the specified clearances between the Servo Driver and the control panel or
!
with other devices. Not doing so may result in fire or malfunction.
Caution Do not apply any strong impact. Doing so may result in malfunction.
!
Caution Be sure to wire correctly and securely. Not doing so may result in motor runaway,
!
injury, or malfunction.
Caution Be sure to firmly tighten the screws fixing the product, the terminal block, and cables.
!
Not doing so may result in malfunction.
Caution Use crimp terminals for wiring. Do not connect bare stranded wires directly to the
!
terminal block. Doing so may result in fire.
Caution Use the power supply voltages specified in this manual. Not doing so may result in
!
burning.
Caution Take appropriate measures to ensure that the specified power with the rated voltage
!
is supplied. Be particularly careful in places where the power supply is unstable. Not
doing so may result in damage to the product.
Caution Install external breakers and take other safety measures against short-circuiting in
!
external wiring. Not doing so may result in fire.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com