Setting Up H.320 Services (Isdn) - Polycom ReadiManagerLX100 Administrator's Manual

Fields in the H.323 Services (IP) Form for a Codec

Setting Up H.320 Services (ISDN)

© Polycom, Inc.
Field Name
Service Name*
Alias
H.320 Services define how MCUs and Codecs can be reached through ISDN. The
information required to define the ISDN service (H.320) in Polycom ReadiManager
LX100 varies for MCUs and Codecs.
Dial rules for dialing out from endpoints that use ISDN are also set in the H.320 (ISDN)
form.
If you will use Least Cost Routing tables, you associate the LCR table with an MCU
through the H.320 (ISDN) service for that MCU.
To set up H.320 (ISDN) service for an MCU or a video codec
1. Open the Equipment form for the MCU or video codec. (For details, see
Equipment Associated with a Resource
2. Scroll down to the Equipment Parameter Information section of the Equipment
form.
3. Click the H.320 (ISDN) link.
4. To define a new H.320 service, click the
already exists, click the
5. Complete all required fields in the form.
Two examples of these fields are described below:
Fields in the H.320 Services (ISDN) form for an MCU
Fields in the H.320 Services (ISDN) form for a Video Codec
6. When you are finished defining the service, click Update.
7. Click Return to return to the Equipment form.
For video codecs, Direct will now appear in the Default Service list.
8. Click Update to save the changes to the Equipment form.
Chapter 5 - Setting Up and Working with Resources
Description
The name of the H.323 service.
Alias (also known as E164) corresponding to the service. This is
number that will be dialed if the endpoints are registered with the
same gatekeeper. This number is defined in the Gatekeeper
service. (If the endpoints are not registered with the same
gatekeeper, they will use their regular IP address to connect.)
If endpoints are not registered with a gatekeeper, you still need to
define an H.323 service, however you should leave this field
blank.
on page 63.)
Add New
Parameter Set link to open the H.320 Service page.
Viewing
button. If an H.320 Service
81