Changing Information About Areas, Zones, And Pipes; Deleting An Area, Zone, Or Pipe - Polycom ReadiManagerLX100 Administrator's Manual

Changing Information About Areas, Zones, and Pipes

Deleting an Area, Zone, or Pipe

© Polycom, Inc.
Delay (microseconds)
Zone Connections
Zone One
Zone Two
Comments
Changes to the network topology can only be made by Network Administrators and
Global Administrators.
To change information about an area, zone, or pipe
1. Display the list of areas, pipes, or zones.
2. In the list, click the link the View column to open the record you want to change.
3. Make the necessary changes in the form and click the
Note that the top links allow adding a zone facilitator or pipes. To learn more about
adding a zone facilitator refer to
Resources in a Zone on page 61. For more information on Pipes see
on page 47.
Warning: Be extremely cautious about deleting an area, zone, or pipe. Deleting a zone
or pipe affects the logic used by Network Aware Scheduling in making bandwidth
decisions. Resources that were assigned to deleted zones will be denied scheduling
due to "insufficient bandwidth" unless they are reassigned to new zones. The same
thing will happen to resources in zones that have pipes deleted, unless other pipes are
available. Deleting an area will also result in users no longer being able to view
Chapter 4 - Entering Network Topology Data
Delay only applies if you are using EIGRP/IGRP or OSPF
Router emulation. It does not apply to GRP router emulation.
(Router Emulation is specified during installation.)
Most users will use RIP, so delay will not apply.
The default delay is 10,000 microseconds (10 milliseconds).
To find out the delay in your network, average the PINGS
between endpoints in the two zones connected by this pipe.
The result will give you a reasonable expectation of the delay.
One of the zones that the pipe connects. The drop-down list
contains all existing zones.
The second of the zones that the pipe connects. The
drop-down list contains all existing zones.
Any comments you want to record about this pipe.
Associating or Removing a Facilitator from All
Warning
Update button.
Defining a Pipe
49