Fields In The Equipment Information Form - Polycom ReadiManagerLX100 Administrator's Manual

Fields in the Equipment Information Form

© Polycom, Inc.
The steps below describe the basic process of adding equipment to a resource. For
specific information about adding MCUs (bridges) and video endpoints, see
an MCU In Polycom ReadiManager LX100
in Polycom ReadiManager LX100
To add equipment to a resource
1. Display the Equipment List for the resource, as described above under
Equipment Associated with a Resource
2. At the top of the Equipment for Room list, click Add New.
3. In the Equipment Information form, complete at least the following fields:
• Equipment Category. From the drop-down list, select the appropriate
category.
• Equipment Description. From the drop-down list, select the specific model of
equipment.
4. Complete any additional information about this piece of equipment and click
Update.
If you are defining a video codec or an MCU, gateway, router, or other type of
networking equipment, be sure to complete all necessary fields in the Parameter
section of the form.
For details about the fields, see
Note: The Parameter fields you see in the Equipment form will vary, depending on the
specific type of equipment you select. Some equipment types have no parameters, and so
a Parameter section is not displayed.
Field or Button
Name
Equipment
Information
Equipment Category
Equipment Description
Chapter 5 - Setting Up and Working with Resources
on page 69and
on page 73.
on page 52.
Fields in the Equipment Information
Description
Select the category that indicates the type of equipment.
Select the specific model of equipment. The choices in this
drop-down list depend on the selection in the Equipment
Category list.
Setting Up
Setting up a Video Codec
Viewing
Form.
65