Parameter Fields For A Radvision Mcu-30 - Polycom ReadiManagerLX100 Administrator's Manual

Scheduling administrator’s guide
Hide thumbs Also See for ReadiManagerLX100:
Table of Contents

Advertisement

Polycom ReadiManager LX100 Scheduling Administrator's Guide

Parameter Fields for a Radvision MCU-30

72
see
Where Settings You Need Are Defined in Radvision MCU-30 Software
page 89.
Note that for this MCU model, only a link to H.323 (IP) Services shows in the
Equipment Parameters section, because this model only supports IP. (Other MCU
models may list links to H.320 (ISDN) services, Gateway services, and Direct
services.)
7.
Complete the IVR-related fields, if appropriate: IVR Capable, IVR IP Alias, and
IVR Number.
8.
Complete the web-related fields, if appropriate: Web Page, Web Port, and XML
Port.
9.
Complete the Conference Limits fields: Maximum CP Conferences, Maximum
Total Conferences, Maximum Total Participants and Maximum Transcoding Ports.
10. Turn on Alert Management, if desired. (For details, see the discussion of the Alert
Management field in
11. Click
Update
to save details about the MCU.
The table below describes parameter settings for an Radvision MCU-30. For general
step-by-step instructions for how to set up this MCU, see
MCU-30 in Polycom ReadiManager LX100
Parameter Field
Equipment
Parameter
Information
H.323 Services (IP)
IVR Capable? (Y/N)
IVR IP Alias
IVR Number
Web Page
Web Port
XML Port
Conference Limits
Maximum CP
Conferences
Maximum Total
Conferences
Fields in the Equipment Information Form
on page 71.'
Description
Parameter fields vary from one type of equipment to another.
The fields and descriptions here are an example, shown for a
Radvision MCU-30.
Click this link to define specific IP service information. For
details, see
Setting Up H.323 Services (IP)
Indicates whether the MCU is IVR capable.
The IP number which conference participants will dial to get to
the IVR prompt when accessing a meeting.
The ISDN-allocated phone number of the IVR.
Web page for the MCU.
Web port for the MCU.
XML port for the MCU.
The Conference Limits parameters define resource limitations
for this MCU implementation.
Maximum number of licensed continuous presence
conferences. This must be a numerical character.
Maximum total conferences at once.
Setting Up an MCU In Polycom ReadiManager LX100
on
on page 65.)
Setting up a Radvision
on page 79.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ReadiManagerLX100 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Readimanager lx100

Table of Contents