Changing The Mail Server Ip Address - Polycom ReadiManagerLX100 Administrator's Manual

Polycom ReadiManager LX100 Scheduling Administrator's Guide

Changing the Mail Server IP Address

194
Only the Global Administrator has access to the SNMP Trap Configuration screen to
enable or disable SNMP and to indicate which traps should be enabled.
To set SNMP Trap configuration
1. From the menu bar, choose Admin > Console.
2. In the Administrator Console list, click the
3. In the SNMP Trap Configuration screen, enter the IP address of the SNMP
management system (such as CA Unicenter or HP OpenView).
4. Check the box for SNMP Traps
5. Enter the SNMP Community name.
6. Check or uncheck the individual SNMP traps to specify for which services you
want traps to be sent.
7. Click Update to make the change.
You enter the Mail Server IP address during installation of Polycom ReadiManager
LX100. If you need to change it, you can do so from the Administrator Console screen.
To change the Mail Server IP address
1. From the menu bar, choose Admin > Console.
2. In the Administrator Console, click the
3. In the Mail Server IP Address form, enter the IP address and click Update.
Edit link for SNMP Traps.
Enabled, to enable this feature.
Edit link for Mail Server IP Address.
Changing the Mail Server IP Address