Polycom ReadiManagerLX100 Administrator's Manual page 82

Polycom ReadiManager LX100 Scheduling Administrator's Guide
74
If you do not define a service for the video codec, it cannot work within
ReadiManager LX100
.
If a room contains more than one codec, create a room resource for each codec. Polycom
ReadiManager LX100 does not support multiple codecs per room.
To set up a video codec in Polycom ReadiManager LX100
1. Create a resource record for a room. For details, see
page 52.
2. After you create the Resource, when prompted, click the
3. In the Equipment Information form, select Video Codec in the Equipment
Category field:
4. In the Equipment Description field, select the type of Video Codec (for this
example, Polycom ViewStation).
The screen refreshes and Equipment Parameter fields that need to be defined for
this video codec appear. (For details about parameter fields for Polycom
ViewStation, see Parameter Fields for a Video Codec
5. Enter the IP Address, Login Name, and Password for the Video Codec.
6. Define the Services used by this video codec. This may include Direct Services,
H.320 (ISDN) Services, and H.323 (IP) Services.
For details about setting up these services, see
Codec on page 75.
If you set up more than one service, select which should be the Default Service.
The person scheduling the conference for this endpoint can select one of the
other services, if desired. For details, see
on page 170.
7. Complete other parameter setting fields, as appropriate. As an example of
parameter fields for a Polycom ViewStation, see
Codec on page 75.
8. Turn on Alert Management, if desired. (For details, see the discussion of the Alert
Management field in
9. Click Update to save details about the ViewStation.
Changing How the Connection is Made
Fields in the Equipment Information Form
Setting up a Video Codec in Polycom ReadiManager LX100
Polycom
Defining a Resource
Add Equipment
on page 75.)
Parameter Fields for a Video
Parameter Fields for a Video
on page 65.)
on
link.