Polycom ReadiManagerLX100 Administrator's Manual page 122

Polycom ReadiManager LX100 Scheduling Administrator's Guide
114
2. Select the type of report you want to schedule - either a Standard Report, or a
Saved Report.
When you select Standard Report, the drop-down list includes the predefined
report available in Polycom ReadiManager LX100.
When you select Saved Report, the drop-down list includes any Custom Reports
that have been created in Polycom ReadiManager LX100.
3. In the Schedule fields, indicate how often and when you want the report to be run.
For example, if you want new reports to be created every day at 2:30 pm, then
select Daily, Recur at 14 hours, 30 minutes.
4. Select any Report Parameters.
5. Click Save Changes.
The report will be run using the schedule you specified.
To edit an existing report schedule
1. From the Report Scheduler window, select a report and click Edit Report Schedule.
2. Make any changes to the existing report schedule and click
To view the listing of all report outputs for a scheduled report
>> From the Report Scheduler window, select the report and click
Folder.
The GeneratedReportResults folder opens and display all .csv files.
To delete a report schedule
1. From the Report Scheduler window, select the report and click
Schedule.
2. When prompted, confirm that you want to delete the schedule.
The schedule is deleted, but existing reports are not.
Save Changes.
Open Reports
Delete Report
Scheduling Recurring Reports