Polycom ReadiManagerLX100 Administrator's Manual page 26

Polycom ReadiManager LX100 Scheduling Administrator's Guide
18
Field Name Description
Talk Hold Time (sec) Indicates the minimum period, in seconds, that a participant has
to speak to become the main speaker. During this period, no other
participant is allowed to become the main speaker. This
parameter is designed to prevent participants from becoming the
main speakers when coughing or laughing or fast and frequent
changes of the main speakers.
This setting cannot be changed in the Advanced Settings dialog
box in the Conference window.
Audio mix depth Sets the number of participants with the loudest voices who can
speak at once during a conference. If additional participants
speak, their comments will not be heard.
Dial Options Determines whether a conference will require all endpoints to dial
in to the conference, or whether a combination of dial-in and
dial-out will be allowed.
Dial In Only.
phone number and pin code are created for all conference
participants. With a dial-in conference, any audio or video system
can dial in, and all participants will be connected to the same
conference inside the bridge. This allows participants to dial into
the bridge at their convenience from anywhere they choose.
Dial Out/Dial In.
dial-out to a video system, as well as to have participants dial in.
When Dial Out/Dial In is selected, the person setting up the
conference can specify the individual resources that should dial
in. For example, it might be desired to have a particular end-point
use dial-in, in which case a bridge will create a dial-in number for
it. For more information about how this can be done when
scheduling a conference, see
Individual Resources
Force MCU Check this box to force all end-points in a conference to use an
MCU. Establishing this as a default provides consistency in the
features available across video conferences, but may limit the
number of calls that can be made at one time. This setting can be
changed in the Advanced Details dialog box when creating or
editing individual conferences.
Auto Start Specifies whether the conference should be auto-started. This
Conferences setting can be changed in the Advanced Details dialog box when
creating or editing individual conferences.
Chair Control Enables someone scheduling the conference to specify a 4-digit
Option number that can be used by the conference chair to control the
conference. (The actual chair control number must be
communicated independently to the conference chair. It is NOT
included in a conference-related email.)
Note:
Equipment record for the MCU.
Creates a dial-in conference for which a particular
Creates a conference that allows the MCU to
Changing Dial-In Settings for
on page 99.
In order to use Chair Control, IVR must be enabled in the
Setting Up Conference Templates