Important Settings For Use With People + Content; 3Rd Party Mcu Support; Setting Up A Video Codec In Polycom Readimanager Lx100 - Polycom ReadiManagerLX100 Administrator's Manual

Important Settings for Use with People + Content

3 rd Party MCU Support
Setting up a Video Codec in Polycom
ReadiManager LX100
© Polycom, Inc.
Parameter Field
Maximum Total
Participants
Maximum
Transcoding Ports
If you want to use People + Content in conferences, you must have a a Polycom bridge
(MCU) that has "IVR Capable" set to
Equipment record for that bridge.
If "IVR Capable" is set to Y, selecting a People + Content format for the conference will
have no effect.
Polycom ReadiManager LX100 supports conference configurations where the
MCUs/bridges used for audio/video calls are controlled by outside firms. The setup of
this feature is specific to your configuration and requires in-depth changes to your
Polycom ReadiManager LX100 database. Please contact your Polycom Support Team
for further configuration information.
Set up for using a video codec with Polycom ReadiManager LX100 includes two main
steps:
Creating a Resource record that defines the resource as a room
Creating an Equipment record associated with that room for the video codec. In the
Equipment form, you provide details about the IP and login information for the
endpoint, define the services used to communicate with the endpoint, and enter
some other details that define the endpoint's capabilities.
Although different video codecs have somewhat different capabilities and features, the
overall process of setting one up is similar. The steps below use setup for a Polycom
ViewStation MP as an example.
If the codec can use more than one service (direct connect, IP, or ISDN), define each,
and then set the method that will be used most frequently in the Default Service field.
Chapter 5 - Setting Up and Working with Resources
Description
Maximum total of MCU participants at once.
Maximum number of transcoding ports—that is, ports on which
both ISDN and IP participants can be connected.
N in the Equipment Parameter section of the
73