Changing Dial-In Settings For Individual Resources; Changing How The Connection Is Made - Polycom ReadiManagerLX100 Administrator's Manual

Polycom ReadiManager LX100 Scheduling Administrator's Guide
Changing Dial-In Settings for Individual
Resources

Changing How the Connection is Made

170
You can specify whether a particular resource should dial-in to a conference.
Note:
If Dial-in Only is selected in Advanced Settings, Dial-In will be selected for all
resources, and the dial-in setting for individual resources cannot be changed.
If is not selected and you select dial-in for one or more individual resources,
Dial-in Only
a dial-in number and pass code will be created and sent to you in the reservation
confirmation email.
To select a dial setting
>> Right-click on the desired resource in the Selected Resources or Guest box of the
Conference Resources window and choose Dial-In.
A check mark indicates whether Dial-In is currently selected.
To allow a different endpoint to dial this resource, make sure this setting is not
selected.
Some resources can be connected to in more than one way. Connection methods
include Dial-In, ISDN, IP, and a Direct connection to an MCU.
The methods available for a given endpoint appear in the Connect Using menu. You
can change the method to be used when scheduling the resources.
To select a different connection method
>> Right-click on the desired resource in the Selected Resources box of the
Conference Resources window and choose
A check mark shows the current method.
Connect Using.

Changing Dial-In Settings for Individual Resources