Client System Requirements; Setting Up Your Browser; Allowing Activex Controls - Polycom ReadiManagerLX100 Administrator's Manual

Polycom ReadiManager LX100 Scheduling Administrator's Guide

Client System Requirements

Setting Up Your Browser

Allowing ActiveX controls

6
The web interface of the
the following:
Microsoft Windows 2000 or XP
Microsoft Internet Explorer 5.5 or greater with Active X control permission enabled
Intel Pentium II-class processor or higher
64 MB RAM. Recommended 128MB RAM for better performance
30 MB free space
For the Microsoft Outlook component, MS Outlook 2000 (SR1), Outlook 2003, or
Outlook XP must be installed. (See Microsoft hardware requirements for Outlook.)
For the Lotus Notes component, Lotus Notes version 6.0.1 or higher must be
installed. (See IBM Lotus Notes hardware requirements.)
There are two security settings in Internet Explorer that need to be set up properly on
each client PC from which
Allowing ActiveX controls
Setting the Polycom ReadiManager LX100
The settings described below refer to the Internet zone. The same settings should
also be applied to the Local Intranet zone as well, especially if
ReadiManager LX100
Many Active X controls are used in
feature that requires an ActiveX control is used, the ActiveX control will be automatically
downloaded to the client PC. To make sure the necessary ActiveX controls are
downloaded properly, you may need to change some security settings in Internet
Explorer.
To set ActiveX control settings
1. Launch Internet Explorer on the client PC, and from the Tools menu, choose
Internet Options.
2. In the Internet Options dialog box, click the Security tab.
Polycom ReadiManager LX100
Polycom ReadiManager LX100
server as a trusted server
is setup with a WINS Name.
Polycom ReadiManager LX100
is supported on computers with
will be accessed:
Polycom
. The first time that a
System Requirements and Setup