Defining An Area - Polycom ReadiManagerLX100 Administrator's Manual

Defining an Area

© Polycom, Inc.
Figure 4-4. Area, Zone, and Pipe Lists
When Polycom ReadiManager LX100 is first installed, these lists include a few default
records. Most of these initial records exist only as examples, and can be deleted. The
one exception is the Off Net Zone. This zone is defined so that you can set up endpoints
that are not on the network. For more information, see
without IP Connections
Areas are the highest organizational level in your network, unless using a distributed
server network. They typically represent a geographical area.
Multiple areas are not required, however they are recommended for large networks.
Their main purpose is to help organize zones.
When you first install Polycom ReadiManager LX100, a default area called
"YourPrimaryArea" is provided. It's a good idea to rename this area to one that is more
meaningful for your network.
on page 56.
Chapter 4 - Entering Network Topology Data
Adding ISDN-Only Resources
45