Using T.120 - Polycom ReadiManagerLX100 Administrator's Manual

Polycom ReadiManager LX100 Scheduling Administrator's Guide

Using T.120

140
Endpoints in the conference that don't support the selected method will connect with
either video (if they connect via IP) or audio only (if they connect via ISDN).
The available settings include:
None
People+Content
People and Content VO
Visual Concert PC
Visual Concert FX
H320 Duo Video
None
Select "None" when dual-streams of data are not required.
People + Content
This Polycom proprietary technology works with most Polycom endpoints.
People and Content V0
Polycom proprietary technology that works mainly with PictureTel endpoints. Select this
option when working with older endpoints.
Visual Concert PC
PC-based software available with Polycom ViewStation MP/512/SP/323.
Visual Concert FX
Hardware solution available with Polycom ViewStation FX/EX and VS4000.
H320 Duo Video
Dual stream mode available with Tandberg endpoints in which one part of the
conference is set as the video conference and the other as the presentation
conference. This selection supports both IP and ISDN.
Polycom ReadiManager LX100 allows you to define T.120 conferences, and to select
the speed for the T.120 connection. Select "None" to disable the T.120 mode.
T.120 is a standard that contains a series of protocols and specifications describing
application sharing in multi-point data communication. The following options may be
available, depending on the participant equipment and software:
Using Advanced Settings