Scheduling Recurring Reports - Polycom ReadiManagerLX100 Administrator's Manual

Polycom ReadiManager LX100 Scheduling Administrator's Guide

Scheduling Recurring Reports

112
Table 6-1. Some Common Joins
Note that Table and ID are shown as Table.ID
When you want to report on
this information
Employees assigned to user
groups (requires two joins)
List of conferences and the time
they were scheduled
List of conferences and the
participants of that conference
Facilitators of a resource
(requires two joins)
You may find it useful to use some of the joins listed above together, to expand your
report. For example, if you want to display the conference name, start and end time,
and participants in one report, you might use the joins shown for Listing conferences
and times and Listing conferences and participants (Conference.confID to
TimeBlock.confID and Conference.confID to Participant.confID.)
The Polycom ReadiManager LX100 administrator can schedule and run recurring
reports by using a special program, run on the Polycom ReadiManager LX100 server.
Reports created through this program are in csv format and are stored in the directory
[drive:]
\CodecMngr\GeneratedReportResults
convention "
Reportn date time.csv
type of report generated.
at separate times. For example, if you are running Call Detail Records, Equipment Types,
and Domains, stagger them 5 or 10 minutes apart, so that the first report runs on the hour,
the second runs 5 minutes past the hour, and the third one runs 10 minutes past the hour.
To run the Polycom ReadiManager LX100 Report Scheduler
>> At the
Polycom ReadiManager LX100
[drive:]\CodecMngr folder and run the ReportScheduler.exe.
Or, choose Start > Programs > PCS > Automated Reporting.
Join this Table and ID
Employee.EmployeeID
UserGroups.GroupID
Conference.confID
Conference.confID
Resource.resID
RoomFacil.userID
" where
n
Note: When running multiple reports, it is a good idea to run them
server terminal, navigate to
To This Table and ID
UserGroups.EmpID
Groups.id
TimeBlock.confID
Participant.confID
RoomFacil.roomID
Employee.EmployeeID
. The resulting csv file name uses the
is numeric value correspond to the
Scheduling Recurring Reports