Setting Up Services; Setting Up A Direct Connect Service - Polycom ReadiManagerLX100 Administrator's Manual

Polycom ReadiManager LX100 Scheduling Administrator's Guide

Setting Up Services

Setting Up a Direct Connect Service

76
Parameter Field
Total IP Parties
Total ISDN Parties
Total Transcoded
Parties
Services are used to define how to communicate with MCUs, gateways, and video
codecs in your network. The particular services you define will depend on the
capabilities of your equipment.
Services are defined in the equipment record for each MCU, gateway, and endpoint.
The same settings must be configured for the equipment itself, as well as within
Polycom ReadiManager LX100.
Available services include:
Direct Services. (For details, see
Gateway Services. (Applicable to MCUs only. When a gateway is used, an H.320
Service must be defined for the MCU, as it will be referenced by the Gateway
service. For details, see
H.323 (IP) Services. (For details, see
H.320 (ISDN) Services. (For details, see
page 81.)
If you define multiple services for a video endpoint, you then select which should be
used as the default service. The person scheduling the conference can elect to use a
different service, if appropriate. For details about how the user adjusts this setting, see
Changing How the Connection is Made
Define a Direct Connect service when a video endpoint will be directly connected to an
MCU. This is typically associated with V.35 type connections to the MCU.
When Direct Service is used, all multipoint calls originating from the endpoint will be
directed through the MCU to which the endpoint is connected. The direct connection
can be achieved via RS-366 dialing if so desired.
Description
The maximum number of IP calls that can be made from this
endpoint.
The maximum number of ISDN calls that can be made from this
endpoint.
The maximum number of transcoded calls (that is, a
combination of IP and ISDN calls) that can be made from this
endpoint.
Setting Up a Direct Connect Service
Setting Up Gateway Services
Setting Up H.323 Services (IP)
Setting Up H.320 Services (ISDN)
on page 170.
on page 76.)
on page 78.)
on page 79.)
on
Setting Up Services