Setting The Connection Type For Individual Resources - Polycom ReadiManagerLX100 Administrator's Manual

Setting the Connection Type for Individual
Resources
© Polycom, Inc.
To use a different connection method, select it from the list.
You can set the type of connection to be used by individual conferences. The settings
you can select are determined by the type of conference selected in the Advanced
Settings. Available choices may include:
None. Use this setting to indicate that only the room is being reserved. When None
is the only available selection, "Rooms Only" is selected as the Conference Type.
Bridged Audio. Use this setting to have an MCU create a dial-in number for this
endpoint. When None and Bridged Audio are the only available setting, "Bridged
Audio Only is selected as the Conference Type.
128, 256, 320, 384, etc. video. Use these settings to specify a particular
connection speed for this endpoint. When these settings are available,
"Video/Audio" is selected as the Conference Type.
To set the connection type for an individual resource
>> Right-click on the desired resource in the Selected Resources box of the
Conference Resources window and choose the appropriate setting.
A check mark indicates the current setting.
Chapter 8 - Scheduling and Managing Conferences
171