Specifying Dial Options - Polycom ReadiManagerLX100 Administrator's Manual

Polycom ReadiManager LX100 Scheduling Administrator's Guide
Rooms Only
Bridged Audio Only
Video/Audio

Specifying Dial Options

164
Select Rooms Only when you only want to reserve the rooms themselves. Although
equipment in them will not be available to other people, no bandwidth will be reserved
for the conference. All other Advanced Settings for the conference become irrelevant,
and are grayed out in the dialog box.
Any conference that uses third-party audio conference systems (outside the control of
the enterprise) can use this setting and then simply use the conference phone in the
room to dial into the third-party conference line.
Select Bridged Audio Only
multiple people can dial. The bridge is reserved as an audio-only media, with no video
media. Choosing this conference type automatically selects the Dial In Only and Force
MCU Usage options. This means that an MCU's resources will be reserved and used
to create a dial-in conference. After you create the conference, the conference
confirmation email you receive will include the dial-in number and pin code required to
access it.
With this type of conference, no bandwidth is reserved except the MCU. The rooms
associated with the resources are reserved, so any equipment in those rooms will not
be available to other people. This also does not reserve precious video resources on
the MCU that would otherwise be reserved for a mixed audio/video call.
Note: Only regular POTS audio phones can be used--not ISDN endpoints. Attempting to
mimic an audio call using a 64K dial speed through an audio/video endpoint may result in
the call being dropped, or in very poor audio quality.
Video/Audio allows you to use a combination of video and audio connections in this
conference, and to reserve the required bandwidth and equipment associated with
resources, as well as the rooms. The conference can use a combination of both Dial-In
and Dial-Out, or you can specify that it should be Dial In only, if you want all connections
to be made through one bridge.
You can determine whether a conference will require all endpoints to dial in to the
conference, or whether a combination of dial-in and dial-out will be allowed.
when you want to set up a dial-in conference into which
Using the Advanced Settings