Arrhythmia; Anesthesia - Dräger Zeus Infinity Empowered Instructions For Use Manual

Alarms

Arrhythmia

Touch the Arrhythmia tab (A).
Alarms
AIVR SVT
V.tach V.run
>=
>= <=
>=
B
C
The following parameters can be configured de-
pending on the option used:
B Dual lead processing: Off/On.
C Arrhythmia monitoring:
– Adv. (optional)
– Basic
– Off
Specify the settings for Rate and Count when an
arrhythmia event is reported.
Setting the Rate
Touch button, set the required value and con-
firm.
For ASY, VF and ARTF the rate cannot be
changed.
Setting the Count
Touch button, set the required value and con-
firm.
Set ranges, see "Set ranges of the patient monitor-
ing alarm limits" on page 179
170
Pause
Tach Brady PVC
>= <=

Anesthesia

Touch the Anesth. tab (A).
Alarms
B C D E F G
A
H I J K L M N
The alarm limits of the following parameters can be
configured:
B inN O (Inspiratory N
2
air)
C inHal (Inspiratory anesthetic agent concentra-
tion of the breathed air)
D inEnf (Inspiratory anesthetic agent concentra-
tion of the breathed air)
E inIso (Inspiratory anesthetic agent concentra-
tion of the breathed air)
F inSev (Inspiratory anesthetic agent concentra-
tion of the breathed air)
G inDes (Inspiratory anesthetic agent concentra-
tion of the breathed air)
H etCO (Endexpiratory CO
2
breathed air)
I inCO (Inspiratory CO
2
air)
J FiO (Inspiratory O
2
K MVe (Expiratory minute volume)
L V (Inspiratory tidal volume)
Ti
M Paw (airway pressure)
N Brody Factor
WARNING
Risk of patient injury
The user must adjust maximum inspiratory VA
concentration to suit the patient or else there
is a risk of concentration levels being too high
or too low.
Instructions for use Zeus Infinity Empowered SW 2.n
O content of the breathed
2
content of the
2
content of the breathed
2
content of the breathed air)
2
A