Dräger Zeus Infinity Empowered Instructions For Use Manual page 295

Classifi- Pri- Alarm text
cation ority
Warning 134 Oxygen cylinder
empty
Note 255 Oxygen cylinder
low
Note 005 Oxygen cylinder
sensor fail
Warning 135 Oxygen supply fail
Note 254 Oxygen supply low
Note 050 PA check zero
Caution 090 PA D high
Caution 090 PA D low
Note 025 PA hardware fail
Caution 090 PA M high
Instructions for use Zeus Infinity Empowered SW 2.n
Cause
O cylinder empty or not
2
open (<20*100 kPa) and O
supply lower than
1.8*100 kPa! Mixer contin-
ues with Air delivery!
O -cylinder pressure low. O
2
cylinder nearly emptied.
O high pressure sensor not
2
connected. Sensor failure.
Oxygen supply failed. Hose
not plugged into wall socket
or hose kinked.
Oxygen supply too low. O
supply between 180 and
260 kPa. O -delivery not
2
within specification.
Pressure transducer for
specified parameter requires
zeroing. The blood pressure
zero of monitor may not cor-
respond to the peripheral de-
vice.
Invasive pressure value out-
side alarm limits.
Invasive pressure value out-
side alarm limits.
Invasive blood pressure
hardware failure.
Invasive pressure value out-
side alarm limits.
Fault – Cause – Remedy
Remedy
Reduce fresh-gas flow, use
Auto control mode. Open or
2
exchange O cylinder.
2
Check insp. O concentra-
2
tion. Check O supply.
2
Use filled O cylinder. Re-
2 2
store central supply.
Connect sensor. Check
sensor. Call DrägerService.
Open O -cylinder. Check
2
central supply. Check wall
connector.
Check O supply. Prepare
2 2
O backup cylinders.
2
Zero the transducer.
Check patient and take ap-
propriate action. Change
the alarm limits if required.
Check equipment and re-
place if necessary.
Check patient and take ap-
propriate action. Change
the alarm limits if required.
Check equipment and re-
place if necessary.
Check hardware and re-
place. Call DrägerService.
Check patient and take ap-
propriate action. Change
the alarm limits if required.
Check equipment and re-
place if necessary.
295