Dräger Zeus Infinity Empowered Instructions For Use Manual page 219

SpO screen display
2
SpO
2
%
99
Zeus IE displays SpO
2
pulse rate in the SpO
2
priate curve field represents the SpO
plethysmogram).
Additionally after touching the Display all button
(prerequisite: Display all button has been config-
ured, see page 332):
– Currently set alarm limits
Settings on Zeus IE
Touch the SpO tab (A).
2
The dialog window for SpO
Sensors/Parameters
A
B
C
D
E
F
G
This page displays:
B The current SpO curve (plethysmogram)
2
C Plethysmogram scale: Scaling of the SpO
curve in relation to the amplitude
D Pulse tone volume [%]
Instructions for use Zeus Infinity Empowered SW 2.n
PLS
67
100
90
saturation values and the
parameter box. The appro-
curve (pulse
2
monitoring appears.
2
H
E SpO averaging: Fast, Normal
2
Normal:
– Using Masimo-SET: On average, 8 seconds
– Using Nellcor OxiMax: On average,
8 seconds
– Using MultiMed*: 90 % of the SpO
is displayed within 30 seconds (this setting
is less susceptible to artefacts, however
alarm messages occur more slowly).
Fast:
– Using Masimo-SET: On average, 2 to
4 seconds
– Using Nellcor OxiMax: On average, 2 to
4 seconds
– Using MultiMed*: 90 % of the SpO
is displayed within 15 seconds (this setting
is more susceptible to artefacts, however
alarm messages occur more quickly).
F Pulse tone modulation (depending on the sat-
uration rate): On, Off
G NIBP interlock: On, Off
Switches SpO
measurement. The SpO
displayed in gray for the duration of NIBP meas-
urement.
H The button opens the Alarms > Alarm lim-
its > Noninvasive dialog window for alarm limit
setting.
Test note and accuracy of the blood oxygen me-
ter (Oxymeter)
To comply with the ISO 9919 standard, do not
check the measurement accuracy of the blood oxy-
gen meter (Oxymeter) with a functional test unit or
a patient simulator.
2
* optional for measurement without SpO
alarms off during an NIBP
2
value is frozen and
2
SmartPod
2
Monitoring
change
2
change
2
219