Overview Of The Monitoring - Dräger Zeus Infinity Empowered Instructions For Use Manual

Monitoring

Overview of the monitoring

Comprehensive patient monitoring is vital in an-
esthesia. The Zeus IE provides the facility to moni-
tor the patient in terms of his vital parameters (e.g.,
heart rate, blood pressure, O
mary signals (e.g., ECG). Patient signals are re-
ceived via various modules and sensors.
Opening dialog window
1200
B
0
0
20
mL/mbar mbar/L/s
Touch parameter field e.g. (A).
The corresponding page opens in the Sensors/Pa-
rameters dialog window.
Or
Touch the area of the loop display (B).
The Sensors/Parameters > Anesth./ Ventilation
> PV FV Loops dialog window appears.
Or
If the Sensors/ Parameters button is configured
(see page 332):
Touch the Sensors/ Parameters button (C).
The Sensors/Parameters dialog window will be
opened.
188
saturation) and pri-
2
A
C
Sensors/Parameters
E F G H I
D
For hemodynamic patient monitoring (optional), the
following pages can be configured:
D ECG
E SpO
2
F NIBP
G IBP
H Temp
I C.O./ Calculat.
J BIS/NMT
For device monitoring, the following page can be
configured:
K Anesth./ Ventilation
The parameter fields are configured in the Screen
setup > Screen layout > Data dialog window,
see page 332.
Parameter module
If "---" is displayed in a parameter module, the
measured value is invalid or out of date.
If an apnea alarm or an asystole alarm occurs, no
measurements will be displayed in the CO
HR/PLS parameter modules. The length of time the
alarm has already been present is displayed in the
relevant parameter module.
Instructions for use Zeus Infinity Empowered SW 2.n
K
J
and
2