Dräger Zeus Infinity Empowered Instructions For Use Manual page 110

Operation
Alternative:
Touch the Continue case button (C).
All the therapy settings are preserved when Con-
tinue case is selected. All trends and the alarm log
are carried forward. Depending on the basic config-
uration, the anesthetic agent concentration will ei-
ther be set to 0 or the last selected value will be re-
tained.
If the startup dialog has been closed, the last se-
lected profile is displayed on the Continue case
button with the corresponding symbol.
2. Set details (Set details)
1 Touch the Weight (D), Age button (E) or Height
button (F).
2 Use the rotary knob to set and confirm the
value.
RR and VT are dependent on the IBW = of the pa-
tient if Radford or Define was selected, see dialog
Basic settings > More settings > Calculat. set-
tings. The patient category has an influence on the
computation of the IBW =.
Patient data Patient category Influenced
Weight (IBW =) Neonates
Height (IBW =) Pediatric patients,
Adults
3. Check settings (Check settings)
The upper display field (G) shows the current set-
tings of gas delivery and ventilation for the selected
profile.
The lower display field (H) shows the IV settings for
the selected profile (optional).
110
4. Start (Start)
After completion of each user action within the Star-
tup dialog, the Ventilator MAN/SPON button (J) is
activated. Confirmation per rotary knob closes the
Startup dialog dialog window and switches to the
MAN/SPON ventilation mode.
Alternative:
Touch the Ventilator standby button (I) and
confirm with the rotary knob to close the startup
dialog dialog window and to switch to Vent.
standby.
Changing IV data (optional)
Startup dialog
parameter
RR, VT
RR, VT
Touch the More IV settings button (L).
The 4 blocks of the IV configuration appear con-
taining all relevant pump data. Drug data and as-
signments can be changed.
Closing the page:
Touch the More IV settings button (L).
Instructions for use Zeus Infinity Empowered SW 2.n
L
Standby