Heart Rate And Arrhythmia Profile Settings - Dräger Infinity Acute Care System M540 Instructions For Use Manual

Setting
The heart rate and arrhythmia profile settings are configured in the following dialog windows
Alarm
(On/off setting)
Upper and lower alarm limits
Archive
Alarm
(Alarm priority setting)
Count and Rate
Archive
Tone volume
(For pulse tone)
Tone source
(For pulse tone)
ECG filter
HR source
Color
(Color of the waveform and
parameter)
Size [mV/cm]
(Size of the waveform)
Pacer detection
QRS sync marker
Cable type
ARR lead 1
ARR lead 2
ARR processing
Instructions for use Infinity Acute Care System – Infinity M540 SW VG4.n
Patient default User default

Heart rate and arrhythmia profile settings

HR limits dialog window
(Touch the heart rate parameter box > HR limits)
x
x
x
ARR limits dialog window
(Touch the heart rate parameter box > ARR limits)
x
x
x
ECG 1 dialog window
(Touch the heart rate parameter box > Settings > ECG 1)
x
x
x
x
x
x
ECG 2 dialog window
(Touch the heart rate parameter box > Settings > ECG 2)
x
x
x
x
x
x
Operating concept
Comments (if applicable)
These settings can be configured
separately for each of the following
parameters: HR, Brady (only in neo-
natal mode); PVC (only in adult and
pediatric mode)
The availability of the parameters,
depends on the selected arrhythmia
mode (see page 149).
This setting affects ECG, ARR, and
ST
Touch the heart rate waveform to set
the scale of the waveform (see
page 46).
This setting is not available when
the ESU filter is activated.
55