Temperature - Dräger Zeus Infinity Empowered Instructions For Use Manual

After measurement, a horizontal line (T) over the
PA curve displays the current PWP value and the
time of measurement (in yellow). The PA curve is
frozen.
The following is displayed in the note field (R): De-
flate ballon, check or change and confirm PWP.
The button (V) with the measured value is yellow.
The value can be changed.
4 Confirm with the rotary knob.
The button turns bright green. The value can still be
changed.
The following is displayed in the note field (R):
Press "Save" to save value in cardiac calcula-
tions and to finish.
Saving measured values:
5 Touch the Save button (W).
The PWP value is saved* and the dialog window
closed.
If there is no confirmation within 4 minutes, the
PWP value is saved.
Open the Trends/Data > Hemodyn. > Cardiac
calculat. dialog window:
6 Touch the Calculations button (Y).
The PWP value is displayed with the time of meas-
urement.
7 Touch the Save button.
The PWP value is saved.
* Alternatively, the Wedge switch on the hemodynamic
module can also be pressed.
Instructions for use Zeus Infinity Empowered SW 2.n

Temperature

Zeus IE can measure body and skin temperatures.
NOTE
The temperature measuring function and the tem-
perature sensors must be calibrated every two
years by qualified personnel so that a measuring
accuracy of ±0.1 °C is maintained.
Safety with high frequency and defibrillation
WARNING
To avoid burns, the temperature sensors must
be covered with a protective rubber sheath
during HF surgery or defibrillation. Skin sen-
sors must not be used with these applica-
tions.
Temperature screen display
Temp
°C
36,4
37,7
The Temperature parameter box displays:
– the measuring unit (°C)
– the measuring position of the sensor
– the associated temperature
Additionally after touching the Display all button
(prerequisite: Display all button has been config-
ured, see page 332):
– Currently set alarm limits
Monitoring
Axil.
39,0
34,0
Nasal
39,0
34,0
233