Settings - Users; Settings - Change Pin; Settings – Language - Kemppi A7 MIG Welder 350 Operating Manual

4.3.6 Settings – Language
Figure 4.12 Settings – Language view
In the Language view you can select the desired language
for the web user interface by clicking on the drop-down
menu. If available, the same language is used in the setup
panel. If the setup panel is not capable of showing the
selected language (for example Chinese) it uses English
as the default.
4.3.7 Settings – Users
Figure 4.13 Settings – Users view
Accessing this view requires administrator or service
supervisor rights.
In the Users view you can
• select User identification
on the buttons.
• change Role for a user by clicking the orange
arrow and clicking on the WELDER, SUPERVISOR
or ADMINISTRATOR button.
• create a new user by typing a name for an unused
user account and selecting
• delete a user by clicking on the user's DELETE
button and confirming the delete in the pop-up
dialog.
• reset PIN code to 0000 by clicking on the user's
RESET PIN button.
See Section 4.4 "User identification"
34
© Kemppi Oy 2017
4.3.8 Settings – Change PIN
Figure 4.14 Settings – Change PIN view
In the Change PIN
PIN code by typing the required information in the fields
and clicking on the CHANGE PIN button.
ON and OFF by clicking See Section 4.4 "User identification"
Role for the user.
for more information.
A7 MIG Welder
view the current user can change the
for more information.
1735