E Resetting Password - Huawei SUN2000-8K-LC0 Series User Manual

SUN2000-(8K, 10K)-LC0 Series
User Manual
Step 1 Check that the AC and DC sides of the inverter are both powered on, and
indicators
Step 2 Complete the following operations within 4 minutes:
Turn off the AC switch and set DC SWITCH to OFF at the bottom of the inverter. If
the inverter is connected to a battery, turn off the battery switch. Wait until all
LED indicators on the inverter panel turn off.
Turn on the AC switch and set DC SWITCH to ON. Wait about 90s and check that
indicator
Turn off the AC switch and set DC SWITCH to OFF. Wait until all LED indicators
on the inverter panel turn off.
Turn on the AC switch and set DC SWITCH to ON. Wait until all LED indicators on
the inverter panel blink and then turn off after 30s.
Step 3 Reset the password within 10 minutes. (If no operation is performed within 10
minutes, all parameters of the inverter remain unchanged.)
1.
2.
3.
Step 4 Set router and management system parameters to implement remote
management.
----End
Issue 01 (2023-09-15)
and are steady green or blinking slowly for more than 3 minutes.
is blinking green slowly.
Wait until indicator
Connect to the app using the initial WLAN hotspot name (SSID) and initial
password (PSW), which can be obtained from the label on the side of the
inverter.
On the login screen, set a new password and log in to the app.
Copyright © Huawei Digital Power Technologies Co., Ltd.
E
Resetting Password
blinks green slowly.

E Resetting Password

127