Process Of The Initial Configuration - Huawei OceanStor S5600 Initial Configuration Manual

OceanStor S5600 Storage System
Initial Configuration Guide
1
About This Chapter
Introduce the process of the initial configuration of S5600.
1.1 Overview of the Initial Configuration
The initial configuration of the storage system is the basis for services. This document describes
the process of the initial configuration of the S5600.
1.2 Planning the Networking
Introduce the typical networking of S5600.
1.3 Installing and Checking the Hardware
Introduce how to install and check the hardware of S5600.
1.4 Configuring the NICs or FC HBAs for the ASs
Introduce how to configure the NICs or FC HBAs for the ASs.
1.5 Setting Up the Management Environment
Introduce how to set up the management environment of S5600.
1.6 Configuring the IP Address of the Management Network Port on the Controller
Introduce how to configure the IP address of the management network port on the S5600
controller.
1.7 Logging in to the OSM3.0
Preparations and steps to log in to the OSM3.0.
1.8 Configuring the Storage System
Introduce how to configure the S5600 storage system.
1.9 Setting Additional Information
Introduce how to set additional information for the S5600.
Issue 02 (2009-09-30)

Process of the Initial Configuration

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Process of the Initial Configuration
1-1